World Class Bed Liners


Spray Bed Liners & More

When you choose to spray Mil-Spec Liner on your truck, your investment is not only safe but tested in very extreme conditions. Mil-Spec has been used and tested on race and chase vehicles in the prestigious Baja 1000 and in subzero conditions only found in the wilderness of Alaska.

The Mil-Spec® Difference

Truck bed
  • Mil-Spec protects critical components on vehicles to survive impacts from rocks, debris, and extreme use only found in these types of terrains.

  • Mil-Spec high tensile strength material provides a superior layer of protection our competitors cannot match. Using a high-pressure system, to achieve this unique strength distinguishes our product from other bed liner companies.

  • Other spray-on bed liner companies use a low-pressure system that produces a softer bed liner that often is more susceptible to material failure resulting in gouging or even tears.

  • Mil-Spec prides itself on using higher quality raw materials to produce a fine grain texture that does not “clump” or “sag” on vertical surfaces. Mil-Spec looks as if it came pre-installed from the vehicle manufacturer.

Mil-Spec® Liner Coverage

Mil-Spec provides a permanent bond that conforms to every contour of your truck bed. This bond creates a barrier from moisture, rust, and corrosion for the lifetime of your vehicle. Mil-Spec is resistant to most chemicals making it a superior material for use in industrial applications.


We will apply a protective masking to ensure that your vehicle is protected from any bed liner overspray. Once that protection is installed, we proceed with the actual material spray coating:

  • Temperature icon

    Unlike other spray-on or drop-in bedliners, a Mil-Spec treatment is professionally applied at high pressure and high temperatures, bonding instantly and permanently to your truck. Made from a two-part polyurethane elastomer system, Mil-Spec uses equal parts of an “A” component, or hardener, and a “B” component, or resin. Using special equipment, the two liquids are combined to create a polyurethane elastomer with tough, durable, protective properties.

  • Stopwatch icon

    Mil-Spec dries in just 3 seconds, preventing runs or pooling that can occur with a cold, low-pressure spray-on product.

  • Calendar icon

    With a pre-scheduled appointment, the total job (including bed preparation, masking, and spraying) will take a few hours depending on the size of the area. For best results, we recommend waiting a full 24 hours before putting your new Mil-Spec to the test.

Ribbon icon

Lifetime warranty

Dollar icon

Competitive Pricing

Sun icon

UV Stable

Link icon

Permanent bond

Atom icon

Molds perfectly to your vehicle

Gem icon

Highly durable

Vial icon

Excellent gloss retention

Palette icon

Endless Variety of Colors

Mil-Spec’s rich history in protective coatings validates its commitment to producing the highest quality coating on the market today. Mil-Spec is not only tested in laboratory conditions but utilizes the harshest outdoor conditions possible.

Behind Mil-Spec stands Burtin Polymer Laboratories (BPL), one of the foremost authorities in the research, development, and commercialization of polyurethane systems produced for commercial roofing, commercial and residential insulation, flotation, adhesives, packaging, spray elastomers, and custom molding products.

Recently launched, its Mil-Spec products are primarily used for pickup truck beds, tailgates, wheel wells, and other similar vehicle protection applications.

BPL continues to develop some of the very few blast mitigation products tested and approved by the US Military and utilized by the United States government in the refurbishment of the Pentagon after the 9/11 attacks.

All Burtin Polymer Labs formulas are proprietary where strict quality controls are implemented using only the finest chemical ingredients and the most sophisticated processing equipment in the industry at their 14-acre, state-of-the-science facility in Orange County, Georgia with warehousing and service operations located in seven States.

Mil-Spec Technology

Mil-Spec® Warranty

Mil-Spec’s rich history in protective coatings validates its commitment to producing the highest quality coating on the market today. Mil-Spec Liner is not only tested in laboratory conditions but utilizes the harshest outdoor conditions possible. All of our liners carry a Lifetime Warranty against warping, cracking, chipping, peeling, or coming off your bed in any way.

Mil-Spec FAQ’s

How much does the Mil-Spec Liner cost?

Mil-Spec’s price starts as low as $400 per bed.

How long does it take to get Mil-Spec installed in my truck?

Details are important to us, and we are definitely not one to rush the process. Most trucks start to finish, take about 4 hours to complete. The more custom the job, the more time is required. Our unique application process means the bed liner material dries and hardens in 3-5 seconds after leaving the gun. That means your truck is dry when it leaves the store and can see “light duty” service almost immediately, however in the interest of “protecting what you love”, we recommend you refrain from “heavy use” for the first 24 hours.

What happens if I damage the liner? Is it repairable?

Yes, in most cases you may have a hard time telling where the damage was.

Can I get a colored liner to match my truck?

Absolutely! Check with your local dealer(s) and verify they offer the BULLET MAGNUM SERIES line of products.

What does the warranty cover?

All of our Mil-Spec liners carry a Lifetime Warranty against warping, cracking, chipping, peeling, or coming off your bed in any way—we aren’t satisfied until you are.

What other products can you spray with Mil-Spec?

The list is endless. Almost anything you might want a thick, tough, durable coating on can be considered. Bullet Liner Orange County operates in 1,500 square feet of warehouse space and a state-of-the-art, medium-sized spray booth—which means there is almost no job we can’t handle. From lifted trucks to trailers, midsize commercial vehicles, ATVs, or RVs —we’ve got you covered. Bullet Liner adheres to concrete, foam, wood, fiberglass, steel, and other products found in everyday life.

  • Eddie C.

    "I had brought my truck in to get the spray-on liner done, Chris and his team did an awesome job. My truck looks amazing and did it at a fair price. I'll definitely be recommending them to anyone who is in the market for a spray-on liner."

    5 star icon

  • Russell D.

    "What an amazing team! I was in town for just a few days and Chris was able to get me in on a very short notice. The work was top notch! I can't recommend this place enough! The ownership should be extremely proud of the team they have here!"

    5 star icon
  • Jose P.

    "I wanted a spray on liner the minute I bought my truck and I finally got it done. The work was exceptional along with the customer service. The pricing is fair and competitive. I live near Santa Fe Springs where there is another company that does spray on liners but I drove out to Huntington Beach because of the ratings and pricing. Let me tell you well worth the drive and I am 100% satisfied with their work and my decision to drive a little further for a quality product and service."

    5 star icon
  • Ryan S.

    "I asked for a quote through yelp and Phillip responded quickly. I got my 2019 Ford F-150 lined and also had them install a Bakflip MX4 cover. Phillip honored the manufacture website price and charged reasonably for install. The liner looks awesome and cover is great. Could not be happier with the service and product."

    5 star icon

    Mil-Spec Liner®

    Huntington Beach

    Copyright ©
    Website by TopIMR